Lustersheen 434 Stainless Steel Wool in Grade Coarse
17 to 18 lb Bulk Reel
Usually the rolls are 15 LB the current rolls are averaging 17 to 19 lbs per
roll. COMPARES TO # 3 STEEL WOOL
AVERAGE FIBER WIDTH
120 microns (0.12mm) / 0.005" (5 mils)COARSE:
434 Grade X-Coarse 104 M
Compares to # 4 Steel Wool
Average Fiber Width:
120 microns (0.12mm) / 0.005" (5 mils)
MEDIUM:
Compares To # 1 ~ #2 Steel Wool
Average Fiber Width:
80 microns (0.08mm) / 0.003" (3 mils)
FINE:
Compares TO # 0 ~ #00 Steel Wool
Average Fiber Width:
50 microns (0.05mm) / 0.002" (2 mils)
Important Note: The Lustersheen stainless steel 434 reels are bulk reels
weighing 15 pounds per reel.
The reels are wound from a continuous woven web 4”wide that is about 3/8”
thick (but varies). The length of the web can vary a lot. For estimating length
of the web we advise allowing 15 to 18 feet per pound.
Stainless Steel Wool is great for dozens of uses, including the filtering of
minerals like gold and silver as well as gases and liquids. It is especially
effective when used as a matrix in conjunction with High Gradient Magnetic
Separators in the processing of clay slurry.
Our stainless steel wool is also the product of choice for packing custom
mufflers for motorcycles and automobiles. Stainless steel wool is a better
packing material for this application than the cheaper and less durable glass
wool often used by low-cost muffler manufacturers. Stainless steel wool is not
affected by the pressures and hot gasses found in vehicle exhaust and, unlike
glass wool, will not compact and degrades less over time.
The ideal choice for many plant maintenance and filtration applications,
Stainless Steel Wool withstands the high temperatures common in industrial
processes and effectively fights rust and corrosion on metal surfaces without
the shedding of rust-prone fibers.
Stainless steel wool is made from Alloy type AISI 434 stainless steel.
The reels are a web of stainless steel wool approximately 1/4" thick by 4"
wide, wound onto a 2-3/8" ID fiber core to an outside diameter of about 8-12"
and weighing exactly 5 pounds net.
Stainless steel wool products withstand temperatures in excess of 700°C,
exhaust acids and high vibration.
Furnace tests show that stainless steel wool will withstand sustained
temperatures of 700°C and peak temperatures of 800° C for up to 10 minutes
without damage or degradation.
CHEMISTRY : C (Carbon) 0.12% max. ; Si (Silicon) 1.0% max. ; Mn (Manganese)
1.0% max. ; S (Sulfur) 0.03% max. ;P (Phosphorous) 0.04% max. ; Cr (Chromium)
16.0 - 18.0% max. ; Mo (Molybdenum) 1.25% max.; Fe (Iron) remainder
Common Reels: The simplest form of stainless steel wool is a continuous
roving, 4 inches wide on reels. This product meets all of the physical demands
for exhaust applications, but is presented in a basic form requiring the
muffler manufacturer to do all of the processing and assembly.
This is a Complete Made in the USA product.
Feedback Policy: We are active sellers both on and off the web. Feedback is
time consuming, and an important part of both buying and selling. It is our
policy that on receiving positive feedback, we will reciprocate. Please send us
en email that you have left feedback, and we will respond in kind ASAP.