WARNING
If you buy more than one product in my shop, write to us and I will refund
all shipping costs NOTE: We issue VAT invoices for countries in the European
Union. Only accredited courier companies GLS, Fedex, DPD, UPS are delivered to
EU countries. Delivery takes 2 to 4 days. We sell wholesale
Hydraulic valve 6/2 way valve - changeover valve 12 volt 50 l / min
Distributor (solenoid valve) 6/2 12V Application:
It is widely used in hydraulic systems in the agricultural, gardening,
forestry, construction and industry in the broadest sense.
The divider is adapted to different types of machines, such as. B.
agricultural machines, tractors, sprayers, tours, cyclopes, HDS loaders,
construction machines, loaders, excavators, sweepers, industrial machines and
other hydraulically controlled devices.
Technical specifications
Electrical plug included.
Recommended system oil flow: 0 - 50 l / min.
Control examples: Two independently working two-way cylinders that are
controlled from one section in a hydraulic distributor Working principle:
The solenoid valve enables switching between two independent double-acting
cylinders by means of an electrical pulse (24 V). It is an ideal solution if we
have a hydraulic distributor that already uses all available sections and
suddenly a new, additional cylinder has to be controlled.
In the TUR loader, this device enables control of a section in the
distributor, bales and bale grabs or crocodiles. Switching between the controls
is done with a button. It can be mounted near the distributor or directly on
the control element, e.g. B. on a lever or joystick.
The solenoid valve enables the control of two servomotors, but does not permit
the simultaneous control of these servomotors. Work should be done on the first
cylinder, then switch to control the second cylinder. Control:
Two-position slide (1 - 2), spring-loaded, d. H. It returns to neutral after
the power is turned off. While the slide is in the neutral position (1), it is
possible to change the actuator no. 1.
Principle of pusher operation:
Position 1 neutral (power supply to the coil is interrupted) Possibility to
control actuator no. 1. 2 Working position (power supply to the coil)
Possibility to control servo motor No. 2. Electricity:
DC power supply 12V
Connection:
Supply from the distributor section (P1, P2): BSP 1/2 '' internal thread
Output to actuator no.1 (A, B): BSP 1/2 '' internal thread
Output to actuator no.2 (C, D): BSP 1/2 '' internal thread
Pressure range:
Maximum pressure: 210 bar
Recommended oil temperature range:
Permissible ambient temperature: -40 ° C to +60 ° C.
Permissible oil temperature: -15 ° C to +80 ° C.
Recommended oil filtration at 10 - 15 µ
Possibility to connect distributors