Sale Off

High Pressure Electric Air Compressor Scuba Diving Pump Water-Cooling 4500PSI

$227.76
  • Cooling mode: water cooling
  • Cylinder head material: cast aluminum
  • Lubrication method: splash type
  • Material: High quality material
  • Maximum temperature: 80 ℃
  • Model: HG-WMTZXL-2928-US
  • Package size: 49 * 28.5 * 43cm
  • Power Source: Corded Electric
  • Pressure range: 0-40MPa
  • Rated power: 1.8KW
  • Shipping Notice: Can not ship to Puerto Rico,Alaska/Hawaii
  • Type: Air Compressor Pump
  • Working noise: 70dB
High Pressure Electric Air Compressor Scuba Diving Pump Water-Cooling
4500PSI 4500PSI High Pressure Electric Air Compressor Scuba Diving Pump Water
Cooling Specifications:
Voltage: 110-130v, 60Hz
Rated power:1.8kw
Motor speed: 2800r / min
Working noise: 70dB
Air output: 130L / min
Cooling mode: water cooling
Compression level: secondary compression
Lubrication method: splash type
Motor material: all copper coil
Cylinder head material: cast aluminum
Shell material: Steel
Pressure range: 0-40MPa
Working pressure: 0-30mpa (4500psi)
Maximum temperature: 80 ℃
Connector type: 8mm quick connect female
Package size: 49 * 28.5 * 43cm
Total weight: 20.5kgs Warranty: 2 Years
Note:
Oil: add piston type air compressor oil (the machine has no oil, because it is
not allowed to carry oil by air)
Speed test: it takes 3 minutes for 0.5L oxygen cylinder to inflate 30MPa, 6
minutes for 1L oxygen cylinder to inflate 30MPa, and 40 minutes for 6.8L oxygen
cylinder to inflate 30MPa.
Operation method of electric air pump:
1.Check the amount of oil before each use, Lubricating oil should exceed the
red dot, but not too much. The oil that is exported to foreign countries is
taken out and needs to be added by itself.
2.Replace the breathing plug. Change the oil cover used for transportation to
a strip-shaped breathing plug.
3.Loosen the air bleed screws on both sides before starting the
machine(Remember, the machine needs to start under zero pressure. If the
bleeder screw is not loosened, the machine will not start. After starting the
machine, tighten the bleed screws on both sides to press normally After the end
of the inflation, loosen the deflated screw and then deflate, then take the
inflation joint).
4.To install the water pump, you need to put the water pump into the water.
The more cold water, the better. After the water pump is normally circulated,
the electric air pump can be turned on Manually shut down after reaching the
required pressure,the whole process needs attention, and it is forbidden to
leave.
Packing list:
1 x set of 30MPa high pressure air pump
1 x water pump
2 x water pipes
1 x filter
1 x spring hose
2 x pressure relief screws
1 x tank breather plug
1 x shock pad 1 x This manual Warm reminder:The manual in the package is a
universal version, if you need any help after receiving it, please contact the
seller directly. Warm reminder:The manual in the package is a universal
version, if you need any help after receiving it, please contact the seller
directly. Payment Delivery details Terms of sales About us Contact us Payment
We accept payment 。 Fees such as import duties, taxes are not included in
the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details Shipping: 2-9 working days to: USA Terms of sales
We maintain high standards of excellence and strive for hundred percent
customer satisfaction. Feedback is very important to us. We hope that you
contact us immediately before you give neutral or negative feedback, so that we
can address your concerns. It is impossible to address issues if we do not know
about them!
About us Your satisfaction is our ultimate goal. We work hard to earn your
trust and future business. Our certified technicians have tested each item
before shipping. The unit comes with 1 year limited warranty on all
manufacturing defects. a) If you receive a defective item, you may return it
or ask for a discount. Please contact us within 14 days after you receive the
package. b) What you returned must be intact and in its original packaging as
re? u. Customer is responsible for shipping costs of the returned item. c) We
will cover the cost of shipping back t with the shipping rate indicated in the
registration page. We will send you a new unit or refund the full payment you
paid. Thank you. Contact us Business Hour Business Hour: Monday To Friday:
8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your
questions may not be immediately. But within above working time, we will reply
your email within 24 hours. If it's non-workdays, please kindly be patient and
wait till Monday. Please contact us with message. Please feel free to
contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM
Beijing China time) Due to time zones, our reply to your questions may not be
immediately. But within above working time, we will reply your email within 24
hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with message. Please feel free to contact us if you have
any questions.
Cooling mode water cooling
Cylinder head material cast aluminum
Lubrication method splash type
Material High quality material
Maximum temperature 80 ℃
Model HG-WMTZXL-2928-US
Package size 49 * 28.5 * 43cm
Power Source Corded Electric
Pressure range 0-40MPa
Rated power 1.8KW
Shipping Notice Can not ship to Puerto Rico,Alaska/Hawaii
Type Air Compressor Pump
Working noise 70dB

Related products