There is a film on the prewired loaded pickguard to prevent scratches and
damage.
Please remove the film before installing loaded strat pickguard on your guitar.
Product Description
Model: HHH Strat Pickguard
DC resistance (approx.):
Neck Humbucker: 7.5K (splitting coil 3.75K)
Middle Single Coil: 7.5 K(splitting coil 3.75K)
Bridge Humbucker: 15K (splitting coil 7.5K)
Hole spacing N:50 mm M:50 mm B:52 mm
Humbucker four conductor wires: black wire is hot, green wire is ground, red
and white is for splitting coil
Material: PVC pickguard and copper coil Pickup
Weight: 700 grams per set
Accessories: 11 screws
Tip: Please check the pickguard size chart carefully before purchasing to make
sure the hole pattern is compatible with your pickup, or be prepared to make
any necessary adjustments!
Compatibility:
Suitable for most Fender (FD) guitars.
Installation Difficulty: Rated as very easy to install.
Weight: 700 grams per set.
Accessories Included:
1 x 3-ply guitar pickguard
3 x Alnico 5 humbucking pickups
1 x 5-way switch
1 x Enhanced switch
3 x Potentiometers (1 volume, 2 tone, copper shaft)
4 x Single Cut Toggle Switches
1 x 400V/200V Capacitor
1 x Output Jack
11 x Screws
In addition to the original function, the two single-cut toggle bring new
functions, as follows.
1.When the Multi switch toggle (first toggle) is on, the neck pickup is active
regardless of the setting on the 5-way.
for example, toggle on + 5-way at the bridge = neck and bridge pickup work
together.
2. Bridge Pickup have single-cut (Push-Pull) switch (second toggle). After
turning on the single-cut switch, you will getdifferent tone, Double coil
pickup will change to single coil pickup tone, the feature will be powerful.