IQ high speed motor magnet for club car golf cart;
Fits Club Car DS & Club Car Precedent 48V IQ Models with ADC Motor;
Increase your IQ golf carts speed without a loss in torque, without
replacing your gears, or any motor/controller upgrades.Most can expect to see
2-8 MPH gain depending on the health of your batteries;
Flip your tow/run switch before installation;
Simply jack up the rear of your cart, remove your passenger side tire,
remove screws holding speed sensor to motor, replace magnet in motor, and
re-install!
If you have questions regarding if your Club Car has a IQ system with ADC
motor or a GE motor . The easiest way to tell is by checking the serial number
prefix. If your serial numbers starts with: AQ, CE, FD, HD, PE, or PQ then you
have a cart with a IQ system. You can also look at the motor controller part
number. If your model number starts with "1510" then you also have an IQ system.
Installation Instructions:
1: Flip the Tow/Run Switch to the TOW position (this should be done whenever
you are servicing the cart)
2: Disconnect main positive and negative battery cables to your cart
3: Remove the ADC speed sensor from the end of your cart motor
4: Now you can gain access to the magnet. Simple remove the magnet by using a
small flat head screwdriver or socket
5: Install the new magnet in the same position you just remove the old magnet
from
6: No just re-install the speed sensor, re-attach the battery cables, and run
the Tow/Run switch back to the RUN position.