INCLUDES PART #MWV-GARMS-T4-19 (GARMIN STRIKER 4) , MWV-RAMDB-SK-PL (RAM
CONNECTION LINK), F5G-UE175-VO (CUP HOLDER ADAPTER) AND ALL HARDWARE AND
ELECTRONICS REQUIRED TO MAKE IT WORK ON A FX
ALL PARTS TO INSTALL ON NEW YAMAHA FX WAVERUNNERS
3.5-inch CHIRP Fishfinder with GPS
Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS
Find fish; mark and return to hot spots, docks and ramps
Convenient keypad operation
Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W
RMS)/(1,600 W peak-to-peak)
Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold
separately)
Finding fish is easier than ever with STRIKER 4 fishfinder. Mark and return to
your hot spots, boat ramps and docks, and share your favorite waypoints and
routes with other STRIKER and echoMAP™ combos. Smooth Scaling™ graphics provide
uninterrupted imagery when switching between depth-range scales. Sonar history
rewind allows you to scroll back through sonar images to mark waypoints you
originally may have missed. Plus, it has a built-in flasher and displays speed
data. Includes tilt/swivel mount, CHIRP (77/200 kHz) transducer with transom
and trolling motor mounting hardware and cable. For high-performance CHIRP,
purchase a GT8 or GT15 transducer (each sold separately).
Experience the Clarity of CHIRP
STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which
provides a visibly higher level of clarity and detail for fish and structure
than traditional 77/200 kHz transducers.
Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of
frequencies, ranging from low to high, then interprets them individually upon
their return. Since the frequencies provide a wider range of information, CHIRP
sonar technology can create crisper fish arches with greater target separation.
You also can upgrade to high-performance Garmin CHIRP technology, which
provides crystal-clear sonar images with even more remarkable target separation
and resolution from shallow to deeper depths. For better fishing, bottom
contours are more visible, even at higher speeds, and signal noise can be
suppressed at greater depths to provide a more timely interpretation of what’s
below.
Mark Spots with High-sensitivity GPS
Unlike regular fishfinders, STRIKER fishfinders have built-in,
high-sensitivity GPS to locate your current position quickly and precisely,
then maintain your GPS location anywhere you go on the lake. More importantly,
they allow you to mark spots where the fish are biting so you can return to
them again in the future. You also can mark docks, boat ramps and other
locations on the lake. Just follow the path created on your screen to return to
them whenever you wish.
Navigate Easily with Waypoint Map
Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see
your position in relation to waypoints you have marked. Use the waypoint map to
easily view, mark and navigate to locations such as brush piles, stumps and
docks. It’s also a great tool for finding your way back to the boat ramp.
Check Your Speed on Screen
You can quickly and easily see your boat’s speed on the screen of your STRIKER
fishfinder. It’s a great tool to make sure you are trolling at the right speed
for the lure you’re using and for a particular fish species. It’s also a good
way to tell if you are going the right speed in wake-controlled areas.
Fish Vertically with Built-in Flasher
STRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime
you are stationary fishing, such as ice fishing or jigging for crappie, the
built-in flasher will show you the bottom, whether it is solid or muddy, your
jig or weighted bait, and the depth of fish as they swim into the sonar beam.
You can even watch how high your jig is being lifted and dropped and whether
fish move toward or away from it.