WELCOME TO THE OFFICIAL FLOORINGINC EBAY STORE PLAY SAFE!
Eco Soft+ Foam Tiles
Product Specification (per tile)
Thickness: ~11mm
Size: 2' x 2'
Weight: 1.00 Lb
Material: Closed cell EVA foam
Recommended Uses
Basements
Kid's Playroom
Light duty home gym flooring
Temporary portable flooring
Trade show flooring
Child care facilities
Our Eco-Soft + tiles are a premium version of our Eco-Soft Tiles. Thicker and
more consistent, these foam tiles are the perfect light weight foam flooring
option for any room in your home. Each tile features two removable edge pieces
and is resistant to water, mold and mildew growth. Since these interlocking
tiles are made with closed celled EVA foam, they are very insulating making
them great for any basement or enclosed patio. These soft tiles are 100% free
of any allergens or latex.
Note: These tiles are made of foam may have some color variation. Also, our
Foam products can be punctured by sharp animal nails, rough use, high heels,
and moving furniture.
Material:
Closed cell EVA foam
Size:
2' x 2'
Weight:
1.00 Lb. per tile
Recommended Uses:
Eco-Soft + tiles have been installed successfully in basements, kid's
playrooms, as light duty home gym flooring, as temporary portable flooring, in
bedrooms, as trade show flooring, in child care facilities, and anywhere a soft
foam flooring surface is desired.
Maintenance:
Eco-Soft + tiles are easy to maintain. Due to the interlocking tiles being
constructed of durable closed cell EVA foam, no liquids can penetrate the
surface of the puzzle tiles
If the soft tiles do get something spilled on them or appear dirty, all
that is required to clean them is to do a quick wipe of the foam tiles with a
damp cloth and your soft tiles will look like new.
Installation:
Installation of interlocking tiles is very simple and typically done by the
consumer. Typical installation of these tiles is as follows:
First, clean your sub floor so it is free of all dirt, grease or debris.
Start in one corner of the room with a corner tile and add border tiles
outward along the adjacent walls. Add center, corner, and border tiles where
you see fit.
When coming up to an opposite wall, make sure you cut the tiles to fit the
area leaving a gap that’s roughly the thickness of the tiles being used to
account for expansion and contraction of the floor tiles in varied temperature
ranges.
Note: When piecing interlocking tiles together, adhesives are usually not
used since the weight of the locked together product is usually enough to keep
the floor tiles from moving. However, if you do experience movement and would
like to ensure that the tiles do not slide at all, some double-sided tape or
mat tape can be used around the perimeter of the installation to prevent any
movement.