A pint-sized powerhouse of all-analog amplifier tone!
Simple in name but comprehensive in tone, the DSM Humboldt Simplifier X Zero
Watt Reverb Stereo/Dual Amplifier pedal raises the Simplifier series to an
entirely new level with two fully independent amplifier sections.
Both sides of the Simplifier X (Hot-Rod and Classic MKII) feature three
spot-on all-analog re-creations of all-time classic amplifier models for a
grand total of six amp voices to twist and tweak with the pedal’s extensive EQ
knobs and Pre Type/Pwr Type switches.
Three unique modes of operation offer nearly endless cab, amp, and effect
switching possibilities, and you also get dual FX send/returns to integrate
your stompbox collection.
Impressed yet? Well, that’s not the half of it: The Simplifier X
all-encompassing feature set rounds it all out with a trio of reverb modes,
dual XLR DI outputs, 1/4-inch outputs with independent Cabsim Bypass, an aux
input, and a headphone jack for silent practice.
It all adds up to a pint-sized powerhouse of all-analog amplifier tone, ready
to go head-to-head with even the most feature-laden digital modeler!
Video demo of the .
Six all-analog amp voices to explore!
No matter what sound you’re after, the Simplifier X is happy to oblige with
two fully independent all-analog amplifier sections and a grand total of six
stunning amplifier voices.
Furthermore, the Simplifier X’s mirrored layout is a tone-chaser’s dream
setup, including fully independent Resonance knobs, Presence controls, Pre
Type/Pwr Type switches, full 3-band EQs, and Cabsim sections.
Amp A : This side — dubbed the Hot-Rod — contains three ripping amps on tap,
from the classic top-boosted chime of AC Brit TB to the screaming gain tones of
MS 800. And, of course, the Hot Rod channel also includes a spot-on re-creation
of a modern American tube amp classic in the USA Rod voice, providing you with
an exacting tonal tribute to the standby tube amp found on backlines and
studios all around the world.
Amp B : The Simplifier X’s Classic Mk-II mode collects three amplifier
voicings from DSM Humboldt’s previous Simplifier series pedals (AC Brit, USA,
and MS Brit). First up, AC Brit re-creates the biting British chime of a
15-watt tube amp classic, while the USA voice goes back to the tweedy
beginnings of American amplification with a rough-and-ready roar. Lastly,
you’ll find the MS Brit voice to be an immaculate sonic tribute to the
high-octane amp head that fueled the classic rock era’s most iconic crunch
tones!
Three distinct modes of operation.
Once you’ve chosen your amps and dialed in your EQ settings, the DSM Humboldt
Simplifier X offers three unique modes of operation to explore:
A/B Amp + A/B Cab : The Simplifier X starts with a standard dual mono mode,
where you swap between your two amp/cab combos with the click of a switch. This
setting is perfect for players who need to instantly swap between different
tones, with each amp sporting its own preamp, power amp, cab, reverb level, and
loop effects.
A/B Amp + Stereo Cab : While this mode also switches between two amp voices,
your cabinets and FX loop remain the same on the Left and Right stereo outputs.
This allows you to dial in unique cab and effect settings on each side,
resulting in a massive and enveloping wash of lush stereo sound.
Full Parallel : Finally, Parallel mode pulls out all the stops, allowing you
to run both of the Simplifier X’s amplifier voices simultaneously, with each
amp routing through the Left and Right outputs. This mode makes full use of the
Simplifier X’s completely independent EQ and tone-shaping control sections
it’s essentially the time-tested double-amp stereo guitar rig packed down into
a compact stompbox).
A comprehensive rig replacement.
This 2-channel pedal has more than a few tricks hidden under the hood,
starting off with a lush full-stereo reverb with Room, Plate, and Ether
settings to impart a sense of space and size to your sound.
Next, a selectable 1/8-inch aux input and headphone jack allow for dead-quiet
late-night practice sessions, and you can even send your aux signal straight
into the PA at a gig using the Simplifier X’s dual XLR DI outputs.
Factor in the output-specific Cabsim Bypass controls and the included 2-button
footswitch with channel switching/reverb buttons, and it’s clear that DSM
Humboldt intended the Simplifier X to serve as a truly comprehensive
centerpiece to your 6-string rig!
DSM & Humboldt Simplifier X Pedal features:
All-analog 2-channel amplifier simulator pedal, elevating DSM Humboldt’s
revered Simplifier series to an entirely new level!
True stereo operation, with 2 independent stereo inputs.
Contains 2 unique sides, each with a trio of unique voices based on all-time
classic amplifier models.
3 modes allow you to pair the pedal’s two Amp/Cab sides in a variety of
different configurations.
Independent Pre Type and Pwr Type switches on each side, with Power Drive
and Preamp Gain knobs to explore a nearly endless array of amplifier
possibilities.
Fully independent EQ controls for each side, including 3-band EQs,
Resonance, and Presence settings to tweak your tone.
Onboard reverb section to add space and dimension to your tone, including
Room, Ether, and Plate settings
FX loop with A/B Send and A/B return 1/4-inch jacks.
Powerful Cabsim section with Combo/Twin/Stack switch and Speaker Color knob.
Stereo 1/4-inch outputs with independent Cabsim Bypass switches, in addition
to stereo XLR DI outs with a ground lift switch.
Headphone jack with headphone level knob for silent practice sections.
Assignable Aux In section with Aux Select control.
Footswitch for effortless hands-free switching between channels and reverb.
Power: 9 - 12V DC.
Current Draw: 150mA.
Dimensions: 5.1" x 3.9" x 2.5".