This listing is for an unfinished made to order rear routed MAHH guitar body
made by Rosser Guitars, LLC. The photos in the listing are for representation
only.You are purchasing a made to order body that will ship in 20 business days
from the date of being purchased.
Once you have purchased the made to order guitar body, we will send you a
message through the store requesting the pickup and bridge routing from the
available options listed below.
Neck Pickup Routing Options:
None
P90
Humbucker
Mini Humbucker
Filtertron
Jazzmaster® style Bridge Pickup Routing Options:
P90
Humbucker
Mini Humbucker
Filtertron
Jazzmaster® style Bridge Routing Options:
Vintage 1/2 Tele® style bridge (2-1/8" string spacing) (Drilled for 3/8"
flush mount string ferrules)
Vintage Strat® style hardtail (2-3/16" string spacing) (Drilled for 3/8"
flush mount string ferrules)
Fender® American Standard hardtail (2-1/16" string spacing) (Drilled for
3/8" flush mount string ferrules)
Gotoh® hardtail (2-1/16" string spacing) (Drilled for 3/8" flush mount
string ferrules)
Hipshot® Fixed Bridge (0.175 Floor Height) (Drilled for 3/8" flush mount
string ferrules)
Nashville tune-o-matic bridge and stop tailpiece (Nashville tune-o-matic
bridge specs: 2.93"/ 2-15/16" post spacing; 0.275"/7mm mounting studs; Stop
tailpiece specs: 3.25" stud spacing; .440" mounting studs)
TonePros® AVT2G wraparound
Jazzmaster® style bridge and tremolo
Vintage 6 hole tremolo (2-7/32" screw spacing)
Vintage 6 hole tremolo (2-1/16" screw spacing)
Fender® American Standard 2 point tremolo
Floyd Rose Original tremolo (Recessed or Non-Recessed) Standard Body Specs:
Unfinished
Wood: 3 piece Alder
Construction: Solid
Contours: Forearm and tummy
Thickness: 1-5/8"
Scale Length: 25-1/2"
Neck Pocket Routing: Meteora®/Strat® style
Control Routing: Rear; 1 Pickup: 2 controls; 2 Pickup: Toggle switch, 3
controls
Drilled for a 7/8" side jack
Average Weight: 3-1/2 lbs to 4-1/2 lbs (We are not able to guarantee an
exact weight) Additional Info:
Lumber used is kiln dried for stability
Lumber will vary in grain pattern and coloration
Body will be sanded up to 150 grit; Final sanding up to 220 grit will be
required
Neck pocket will be routed to standard U.S. Fender® specs (2-3/16" x 3" x
5/8")
Neck pocket will be angled for bodies routed for a Nashville tune-o-matic,
TonePros AVT2G or Jazzmaster® style bridge
Wiring holes will be drilled
Black plastic rear cover will be included
Adjustments may be required when fitting the neck, parts and hardware
This is not a Fender® body. Rosser Guitars is not affiliated with Fender
Musical Instrument Corporation (FMIC). Fender®, Meteora®, Tele®, Strat® and
Jazzmaster® are all registered trademarks of Fender Musical Instrument
Corporation (FMIC).