Sale Off

Automatic Temperature Control Egg Incubation Foam Bionic Egg Incubator Tools

$39.7
  • Country/Region of Manufacture: China
  • EAN: Does not apply
  • MPN: Does Not Apply
Automatic Temperature Control Egg Incubation Foam Bionic Egg Incubator
Tools Popular
Popular
Product Introduction
1. 100% brand new high-quality products. 2. Made of high-quality materials,
durable and practical. 3. The temperature difference of the machine can be
calibrated according to the measured temperature to make the temperature more
accurate and the shell removal rate higher. 4. Dual power supply, not afraid of
power failure. 5. Bionic incubation, inspired by the structure and function of
organisms, the bionic water bed designed according to the parent incubation
conditions can easily hatch each seed egg. 6. Accurate temperature control,
self-contained eggs, not afraid of power failure and low energy consumption
Parameters: Product voltage: AC220V / DC12V Power: 20W Size: 36 * 24 * 19cm
Plug: American plug Scope of application: eggs of various birds usage method:
Step 1: first, add an appropriate amount of clean water into the incubation
water bag and prepare for use. The second step: after receiving the incubator,
lay the bottom heating flat. Place the water filled water bag on the heating
pad. The opening of the water bag is clamps in the foam box next to the
incubator to prevent water from splashing out. Step 3: put the temperature
sensor into the water bag and fix it with adhesive tape (be sure to stick it on
the surface of the water bag and contact the water bag). When ready, put eggs.
Step 4: start the machine test. After the temperature is stable, put the
sterilized eggs evenly into the water bag in the incubator. Step 5: in the
incubator, after the hatching eggs are laid, cover the breathable and warm
quilt on the eggs, which will not be too loose or too tight. There is no need
to cover the incubator during the hatching process. If the temperature is low,
the quilt should be covered tightly; if the temperature is high, it should not
be covered too tightly. Step 6: fill the watering can with water and put it
into the machine to keep the water temperature in the kettle consistent with
the egg temperature. Spray water three days before incubation, 2-3 times a day.
be careful: Be sure to test the water bag for water leakage, otherwise it will
lead to the risk of short circuit. You must ensure that the covered material is
breathable and that there is enough oxygen in the incubator. Invert the eggs in
the incubator every day (2-3 times / day). Do not remove heat by rotating the
eggs. Package list: Incubator * 1 Mini sprayer *1 Crocodile clip * 1
Transparent plastic bag * 1 Quilt * 1 American plug adapter * 1
Payment
Shipping
Refund Payment
We accept PayPal only. But we only Accept your Ebay Address,Please Make
sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal
when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because
most of orders will be processed instantly and same day dispatched. Shipping
We maintain high standards of excellence and strive for 100% customer
satisfaction! Feedback is very important to us. We request that you contact us
immediately BEFORE you give us neutral or negative feedback, so that we can
satisfactorily address your concerns. Refund
All package need to wait 30 days(US only need 7-10 days),Please take care
it.Less than 30 days,we can't take a refund.
If the item is defect when you receive it or you are not satisfied with it,
please return it within 14 days for a replacement or money back. But the items
must be back in factory condition. Please contact us and double check the
return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send
you a new replacement after receiving the defective item.
Automatic Temperature Control Egg Incubation Foam Bionic Egg Incubator
Tools
Product Introduction
1. 100% brand new high-quality products. 2. Made of high-quality materials,
durable and practical. 3. The temperature difference of the machine can be
calibrated according to the measured temperature to make the temperature more
accurate and the shell removal rate higher. 4. Dual power supply, not afraid of
power failure. 5. Bionic incubation, inspired by the structure and function of
organisms, the bionic water bed designed according to the parent incubation
conditions can easily hatch each seed egg. 6. Accurate temperature control,
self-contained eggs, not afraid of power failure and low energy consumption
Parameters: Product voltage: AC220V / DC12V Power: 20W Size: 36 * 24 * 19cm
Plug: American plug Scope of application: eggs of various birds usage method:
Step 1: first, add an appropriate amount of clean water into the incubation
water bag and prepare for use. The second step: after receiving the incubator,
lay the bottom heating flat. Place the water filled water bag on the heating
pad. The opening of the water bag is clamps in the foam box next to the
incubator to prevent water from splashing out. Step 3: put the temperature
sensor into the water bag and fix it with adhesive tape (be sure to stick it on
the surface of the water bag and contact the water bag). When ready, put eggs.
Step 4: start the machine test. After the temperature is stable, put the
sterilized eggs evenly into the water bag in the incubator. Step 5: in the
incubator, after the hatching eggs are laid, cover the breathable and warm
quilt on the eggs, which will not be too loose or too tight. There is no need
to cover the incubator during the hatching process. If the temperature is low,
the quilt should be covered tightly; if the temperature is high, it should not
be covered too tightly. Step 6: fill the watering can with water and put it
into the machine to keep the water temperature in the kettle consistent with
the egg temperature. Spray water three days before incubation, 2-3 times a day.
be careful: Be sure to test the water bag for water leakage, otherwise it will
lead to the risk of short circuit. You must ensure that the covered material is
breathable and that there is enough oxygen in the incubator. Invert the eggs in
the incubator every day (2-3 times / day). Do not remove heat by rotating the
eggs. Package list: Incubator * 1 Mini sprayer *1 Crocodile clip * 1
Transparent plastic bag * 1 Quilt * 1 American plug adapter * 1
Payment
Shipping
Refund Payment
We accept PayPal only. But we only Accept your Ebay Address,Please Make
sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal
when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because
most of orders will be processed instantly and same day dispatched. Shipping
We maintain high standards of excellence and strive for 100% customer
satisfaction! Feedback is very important to us. We request that you contact us
immediately BEFORE you give us neutral or negative feedback, so that we can
satisfactorily address your concerns. Refund
All package need to wait 30 days(US only need 7-10 days),Please take care
it.Less than 30 days,we can't take a refund.
If the item is defect when you receive it or you are not satisfied with it,
please return it within 14 days for a replacement or money back. But the items
must be back in factory condition. Please contact us and double check the
return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send
you a new replacement after receiving the defective item.
Country/Region of Manufacture China
EAN Does not apply
MPN Does Not Apply

Related products