Inkbird temperature controller is a pre-wired heating thermostat with timing
function, especially for the reptile breeding, incubation and cultivation.
Convenient Design] Plug and play, easy to use. Support reading with
Centigrade or Fahrenheit.
Dual Display Window] Be able to display measured temperature and set
temperature at the same time.
Different Functions] Temperature calibration, over-temperature and sensor
fault alarm. Maximum output load: 1200W (110V).
Only Heating] Temperature Control Mode: On/Off Control. Please note it is
only heating controller without cooling function. Both of the plugs can control
the heating. But totally could not over 1200W.
Dual Time Cycle Setting] Can be set different temperature from day and night
on the basis of the physical needs of animals and plants during 24 hours.
Package Content] 1x ITC-306T Controller+1x Rubber Probe
US Socket
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5x2.7x1.3 inch.)
Socket Dimension: 85x42x24mm (3.3x1.7x1 inch.)
Service：1 Year
Rubber Probe
Temperature Control Mode：On/Off Control, Heating
Waterproof level: IP68
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Digital Thermostat
Temperature Control Output: Max. 10A, 120V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Temperature Resolution: 0.1° C/0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) ±1°F (-50 ~ 160° F)
Inkbird temperature controller is a pre-wired heating thermostat with timing
function, especially for the reptile breeding, incubation and cultivation.
Convenient Design] Plug and play, easy to use. Support reading with
Centigrade or Fahrenheit.
Dual Display Window] Be able to display measured temperature and set
temperature at the same time.
Different Functions] Temperature calibration, over-temperature and sensor
fault alarm. Maximum output load: 1200W (110V).
Only Heating] Temperature Control Mode: On/Off Control. Please note it is
only heating controller without cooling function. Both of the plugs can control
the heating. But totally could not over 1200W.
Dual Time Cycle Setting] Can be set different temperature from day and night
on the basis of the physical needs of animals and plants during 24 hours.
Package Content] 1x ITC-306T Controller+1x Rubber Probe
Different temperatures can be set during the day and night. For example, keep
the temperature between 20 and 22°C between 8:00 a.m. and 6:00 p.m. and between
24 and 26°C between 6:00 p.m. and 8:00 a.m
US Socket
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5x2.7x1.3 inch.)
Socket Dimension: 85x42x24mm (3.3x1.7x1 inch.)
Service：1 Year
Rubber Probe
Temperature Control Mode：On/Off Control, Heating
Waterproof level: IP68
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Digital Thermostat
Temperature Control Output: Max. 10A, 120V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Temperature Resolution: 0.1° C/0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) ±1°F (-50 ~ 160° F)