US 3HP 250L/min 115PSI V Type Twin Cylinder Air Compressor Pump Head Single
Stage Description： 3HP 115PSI V Type Twin Cylinder Air Compressor Pump Head
Specifications:
l Power：2200W, 3HP
l Cylinder：65 * 2
l Exhaust capacity：250L / min（8.8cfm)
l Discharge pressure：8 bar（115 PSI）
l Speed：1050rpm
l Application of air compressor: factory, home decoration, auto repair,
painting, etc
l Note: If the motor speed is 2880rpm, the diameter of the motor wheel is
10 cm. If the motor speed is 1440rpm, the motor wheel is 20 cm
model：V-0.25/8
horsepower：3HP
Maximum pressure： 115PSI
Pulley diameter： 250MM
Nozzle thread ： American 3 / 4-16 (external diameter of thread: 19mm)
Revolutions: 1000-1100revolutions
Compression pump：Single Stage Features:
l High efficiency, high precision, universal, low energy consumption.
l High quality material, not easy to damage.
l Strict balance support and correction to ensure the smooth operation of
the main engine.
l Special valve steel is used for hair piece, which has good strength and
toughness at high temperature.
l Faster inflation and low noise.
l Strong cooling blade, good cooling performance. Packing list: 1 x Air
Compressor Pump head Installation notes: 1、 When placing the pump head, the
motor pulley and the belt pulley must be in the same straight line. The more
aligned, the less vibration. 2、 Tighten the screws (including the base and
pulley screws). 3、 After the screws are installed, the belt shall be tightened.
If the belt is loose, please move the motor. After the screws are tightened,
reinstall the belt. 4、 The new machine must be filled with engine oil before
starting, and the engine oil shall be added to the center of the red point of
the oil mirror. 5、 The rotation direction of the pump head is clockwise. If it
reverses, please adjust it in time. 6、 Change the oil for the first half month,
the second one and a half months, and the next two to three months. 7、 Replace
the air filter regularly. Under normal conditions, it must be replaced in two
to three months, and in case of poor environment, it must be replaced in one
month. 8、 The operation of the machine will produce high temperature, be
careful not to burn!
On Sep 19, 2024 at 20:14:29 PDT, seller added the following information: